Bohemian Biker Blog

Tag: cigarette lighter

Possibilities Provided by an SAE 2 Pin Connection

by on Oct.07, 2011, under Hello World!, SAE 2 Pin

If you’re a Biker, check out the possibilities provided by the SAE 2 Pin connection on your Fused Quick Connect “pigtail” (if you have a Deltran Battery Tender, and installed the included assembly on your motorcycle’s battery):

As the saying goes – a picture is worth a thousand words…  Made up this display to get the point across –  there are quite a few assemblies that will couple up to your Fused Quick Connect “pigtail”.  These assemblies address applications ranging from extending reach to facilitating things like adaptation of 12 Volt “cigarette lighter plug” type cell phone chargers, and COAX heated clothing (example: heated gloves) connectors.  In addition, there are butt ended assemblies allowing do-it-yourselfers to install their own accessory circuits for charging such hand held electronics as GPS units and iPods.

So, it can be visualized that the SAE 2 Pin connector on your Deltran Battery Tender “Fused Quick Connect” pigtail provides access to your motorcycle’s battery and charging system 12 volt power.  This, in addition to providing the means to conveniently and effectively maintain and thereby extend the life of your bike’s battery.

The SAE 2 Pin connector is often alternatively called an SAE 2 Prong, SAE 2 Pole, SAE 2 Conductor connector, as well as a “flat” or “trailer” connector.  Generally speaking, it is intended for 12 Volt DC applications.  Assemblies with this connector can often be found in your local automotive store – usually in the form of a 12″ extension.  Widely imported, the quality and durability fits lighter applications.

Although some of the displayed assemblies are imported from abroad, those made for Bohemian Biker LLC (and to our specifications) are manufactured here in the USA !!! The higher quality of these SAE 2 Pin connectors manufactured here in the United States is obvious – they are sturdier, and have greater strain relief.

Additional Blog Posts pertinent to the above products can be found via headings at the top of webpage.  Note – It is very important for anyone attempting to use these assemblies to have a clear understanding of electrical concepts such as “polarity”.  We highly recommend educating oneself along this line.

Products are available via our ecommerce store at: www.solarcapitalist.com

Solar Capitalist LLC is our sister company specializing in the Deltran line of Battery Tenders and accessories(including solar powered units), Global SUNLINQ Portable Solar Chargers and accessories, as well as, SAE 2 Pin connectors, leads, and cable assemblies (including heavier cable assemblies for handling higher amperages).

Bohemian Biker LLC and Solar Capitalist LLC are authorized dealers for both the Global Solar and Deltran lines of products.

Capitalize on the Sun’s Energy !

bb-banner-1028087
Leave a Comment :, , , , , , , , , , , , , , , , , , , , , , , , , , more...

DIY Motorcycle Power Port

by on Apr.12, 2009, under Accessories

power-port

By the number of 12 volt power ports with pigtail leads I ship to motorcyclists, I recognize there are a large number of Bikers adding this circuit to their ride.  More often than not, they tell me they are wiring up a rig to power/charge a GPS unit.

I’m not sure how sophisticated they are getting with their circuits, but it sounds like most are keeping it pretty simple.  I offer inline fuseholder assemblies, but I could count the number of those I’ve sold on one hand.  I’m not sure if they are tapping into another circuit on the bike, or going straight to the battery.  It doesn’t seem like I sell SAE 2 Pin connectors to these do-it-yourselfers, so I don’t think they are connecting the power port to a battery quick connect.

Part of the reason I wanted to begin this Blog site was to open the door to interaction along lines such as these.  Provide a forum for dialogue specific to topics like this – thereby, providing the opportunity and means to capture the experiences of others…to the benefit of interested viewers.

I see blog postings on other blog sites addressing these and related topics, but my desire was to drill down on these topics specifically.  With the number and speed with which handheld electronics are coming at us, and the growing popularity of riding on 2-wheels, I decided to seize the opportunity.  Being an engineer…and a biker…I was naturally drawn into this area of interest.  I also appreciate the interaction with those that share a love of motorcycles and motorcycling.

Getting back to the topic at hand, the 12 volt power port I’ve been supplying is of good quality, and manufactured by a company well known for this sort of equipment.  The leads are relatively light and the unit is rated a 5 amps maximum, but that is certainly sufficient for applications such as powering or charging a GPS unit.

It seems that most Bikers are just making up an assembly that they view as relatively temporary…maybe removing it after each use.  Probably figuring they only need GPS when they are on a trip, or traveling in unfamiliar territory.  Hopefully, for more permanent installations they would get a little more sophisticated with their add-on circuits.  Although, if that was the case, they’d probably get more sophisticated with the power port design, as well.  Maybe even one of the power ports suitable for handlebar mounting, with a spring-loaded cap, etc.

At any rate, currently there seems to be plenty of interest in these low cost power ports, and this is no doubt a great opportunity to smoke out the issues that will lead to the development of add-on power ports and circuit designs that will prove best.

We welcome email at: bohemianbiker@bohemianbiker.com

Currently, our products are available through our new e-commerce website at:  www.solarcapitalist.com  

Here’s the link leading directly to the product discussed above:  http://www.solarcapitalist.com/motorcycle12vpowerportleads.aspx

Solar Capitalist LLC is our sister company handling products such as those discussed above, Deltran Battery Tenders, as well as Portable Solar Chargers – Capitalize on the Sun’s Energy !

bb-banner-1028087
Leave a Comment :, , , , , , , , , , , , , , , , more...

12 Volt Accessory Cable 5-pc Kit w/ SAE 2 Pin Connect

by on Apr.05, 2009, under Accessories

12V Accessory Cable Kit

12V Accessory Cable Kit

This handy accessory kit is comprised of 5 cable assemblies with SAE 2 Pin connect.  The kit includes: 12V Power Port, 12V Power Plug, Battery Terminal Clamps, 2.5mm “male” COAX adaptor, and an 8 foot extension cable.
These cable assemblies can be indispensable.  Coupled with the necessary 12 volt charger, they can facilitate the charging of a cell phone and other electronics.  They can also facilitate the trickle charging of a 12V battery.
The SAE 2 Pin end of these assemblies is meant to be connected to a “power side” SAE 2 Pin connector leading from a power source, i.e., one with a hot (+) positive socket.  In other words, the exposed “male” pin of the SAE 2 Pin connector on the end of these assemblies is meant to be hot (+) positive.
The power port cable assembly, for example, has the conductor leading from the exposed “male” pin of the SAE 2 Pin leading to the (+) positive center post within the power port.   The power port plug assembly, similarly has the conductor leading from the exposed “male” pin of the SAE 2 Pin leads to the (+) positive center post  at the end of the power port plug.
Special attention is required with respect to the battery terminal clamp assembly.  The fact that it is wired similarly…(making it useful for trickle charging, etc., when connected as described above) …makes it unfit for use connected to the output of a Battery Tender.  Here’s why – the SAE 2 Pin connector at the end of a Deltran Battery Tender output has a (+) positive exposed male pin to match up to the SAE 2 Pin of a properly installed Deltran fused Quick Connect…which will have a hot (+) postive female socket.
These are light duty 12 volt cable assemblies, as indicated by the 2 amp fuse integral to the power port plug x SAE 2 Pin assembly.

We welcome email at: bohemianbiker@bohemianbiker.com

This product is available through our new e-commerce website at:  www.solarcapitalist.com  

Here’s a link leading directly to this product listing: http://www.solarcapitalist.com/12voltaccessorycable5pckit.aspx

Solar Capitalist LLC is our sister company handling products such as those discussed above, Deltran Battery Tenders, as well as Portable Solar Chargers – Capitalize on the Sun’s Energy !

bb-banner-1028082
Leave a Comment :, , , , , , , , , , , , , , , , , , , , , , , , , more...

12 Volt Power Port

by on Apr.03, 2009, under Accessories

I’m probably not alone with respect to finding myself with a dead cell phone battery at inopportune times.  Being caught in this position when preparing to go out for a day of riding, prompted me to come up with a way to charge a cell phone using my motorcycle’s battery and charging system.

I was convinced that the “pig tail” (or “fused quick connect”) generally left connected to one’s motorcycle battery for use as part of a battery tender system, provided a handy means of connection to the motorcycle’s battery and charging system.  It was just a matter of coming up with a cable having that SAE 2 Pin connector at one end and a “cigarette lighter” style power port at the other.

Encouraged by discussion with those with whom I shared this idea, I set out to make these 12 volt power ports readily available to bikers with a desire to power their 12V chargers, etc.

After assembling and trying out a few prototypes, I contracted a manufacturer here in the USA to produce a large quantity of power port assemblies at a length that seemed like it would be popular with many bikers – just long enough to reach our saddlebags (I discuss use of this power port assembly in conjunction with saddlebags in a separate post).

12V Power Port Assembly

12V Power Port Assembly

This was a power port assembly from the initial shipment.
They were about 14″ long, with about 9″ of Black SPT-1 Cord (18 AWG conductors), which was shorter than anticicpated.
Right off, I was thrilled with the high quality SAE 2 Pin connector that our manufacturer turns out.  It’s sturdy, and the size makes it easily grasped.
Since then, the assembly has been lengthened, such that the overall length of the assembly is about 15-1/2″, with 11″ of Black SPT-1 Cord (18 AWG conductors).
We’ve gone through several hundred, and bikers seem to be very pleased with the current length – long enough to reach…yet short enough to make it handy and compact for easy storage.

We welcome email at: bohemianbiker@bohemianbiker.com

This product is available through our new e-commerce website at:  www.solarcapitalist.com  

Here’s the link leading directly to the product discussed above:   http://www.solarcapitalist.com/12voltpowerportxsae2pinadapterassembly.aspx

Solar Capitalist LLC is our sister company handling products such as those discussed above, Deltran Battery Tenders, as well as Portable Solar Chargers – Capitalize on the Sun’s Energy !

bb-banner-102808
Leave a Comment :, , , , , , , , , , , , , , , , more...

Using the Bohemian Biker 12V Power Port x SAE 2 Pin Assembly

by on Apr.03, 2009, under Application

In the case of a bike with saddlebags, there is a pretty simple set up that I often use to charge my cell phone while I’m out on my bike.  I use a cable (approximately 12” long) with an SAE 2-prong connector at one end, and a “cigarette lighter” style power port at the opposite end.  I couple the SAE 2-prong connector end up with the matching connector on the “battery tender” pigtail left connected to my Road King’s battery.  Then I plug the 12-volt charger I bought to go along with my cell phone into the power port, and the other end into my cell phone.   There is just enough power port cable length to enable me to put the cell phone, charger, and power port connection in my saddlebag, leaving only a short length of exposed cable.  This set up works like a charm for me, and it has conveniently bailed me out of untimely dead cell phone battery situations many times.

The same set up could be used for charging many other portable electronic devices, keeping the device safely stored in your bike’s saddlebag.   A similar set up could be arranged using a backpack secured to your passenger seat, luggage rack, or gas tank, with sufficient cable length.  If necessary, some sort of conveniently sized bag (made out of leather, for example) could easily be suspended in a strategic location.

pwr-prt-mc-setup-001

pwr-prtmc-setup-002

The 12 Volt Power Port x SAE 2 Pin assembly pictured in these photographs is what we call our “compact” model, since the body of the power port is relatively short in comparison to most I’ve seen.

Although I’ve experienced no problem closing my hinged saddlebag cover across the cable, I anticipate that will interfere with the rubber seal’s ability to do its job…and in the event of rain, water would make its way into the saddlebag.

When we were developing the design for the 12 Volt Power Port x SAE 2 Pin we have had manufactured, the ability to close a hinged saddlebag lid across the cable was taken into consideration.  I chose SPT-1 w/ 18 AWG conductors (vs. the heavier possibilities…SPT-2 /16 AWG) specifically with this ability in mind.

We welcome email at: bohemianbiker@bohemianbiker.com

This product is available through our new e-commerce website at:  www.solarcapitalist.com  

Here’s the direct link: http://www.solarcapitalist.com/12voltpowerportxsae2pinadapterassembly.aspx

Solar Capitalist LLC is our sister company handling our products such as the above, as well as Deltran Battery Tenders and Portable Solar Chargers – Capitalize on the Sun’s Energy !

bb-banner-1028085

Leave a Comment :, , , , , , , , , , , , , , , , , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!