Bohemian Biker Blog

Tag: iPod

Our Sweet and Simple 12 Volt Power Port x SAE 2 Pin Connector – A Popular Motorcycle Accessory

by on Feb.26, 2012, under Accessories, Application, SAE 2 Pin

Our 12V Power Port Adapter Assembly allows a Biker to tap into his or her motorcycle battery and charging system’s 12 Volt power while on the go.  This handy adapter assembly is designed to specifically address the needs of the Biker with a motorcycle not outfitted with a faring/dash mounted power port.  It facilitates convenient connection to an installed Battery Tender Fused Quick Connect pigtail, and thereby it allows the Biker to charge handheld electronics, such as a cell phone.


Sweet, Simple & Secure – the beauty of this setup is the ability to stow all involved components in an adjacent saddlebag.  In fact,  the design length of our assembly was set on that basis.  We chose SPT-1 cord with 18 AWG leads to minimize thickness –  thereby allowing the ability to close a hard case saddlebag across it without excessively stressing the hinges.  Often using this setup myself, I find it works very well for me.  In the event of traveling rain, obviously this setup would negatively impact the seal and should be avoided.

Not long for reaching 2000 of these assemblies sold, with nothing but positive feedback, continued popularity and sales are certain for this conveniently useful piece of electrical gear.  Many a do-it-yourself type has cobbled together a similar assembly, and it was just a matter of us taking on the manufacture of an optimally designed assembly a little more than 3 years ago.

Cheap insurance at our bargain price of $4.95 + shipping (less than $2.00 for USPS 1st Class shipping here in the US).  One of these adapters could very well save the day in the event yo find yourself in need of a means of communication and your cell phone battery is D-E-A-D.

Here’s a suggestion – consider talking it up with with friends such that you could assemble an order and share the cost of shipping.  Six or eight could still ship via economical USPS 1st Class Mail, 10 or 12 could ship via USPS Priority Flat Rate small box for $5.35.

We were pleased to see our industry partner – Deltran, bring their model to the table.  Outfitted with a 5 foot cord and a tethered cap for the power port socket – this is a great alternative.  A bargain as well at our price of $8.95 + shipping, we carry this model for those desiring its particular features.  This model facilitates the hot set up for a tank bag, or rally bag.

Please comment or email any questions or concerns – we welcome email at:

These and other products are available through our e-commerce website at:  

Here are the links directly to the above assemblies:

Solar Capitalist LLC is our sister company handling products such as the above, Deltran Battery Tenders & accessories, and Global SUNLINQ Portable Solar Chargers & accessories.

Capitalize on the Sun’s Energy !


Leave a Comment :, , , , , , , , , , , , , , , , , , , , more...

Possibilities Provided by an SAE 2 Pin Connection

by on Oct.07, 2011, under Hello World!, SAE 2 Pin

If you’re a Biker, check out the possibilities provided by the SAE 2 Pin connection on your Fused Quick Connect “pigtail” (if you have a Deltran Battery Tender, and installed the included assembly on your motorcycle’s battery):

As the saying goes – a picture is worth a thousand words…  Made up this display to get the point across –  there are quite a few assemblies that will couple up to your Fused Quick Connect “pigtail”.  These assemblies address applications ranging from extending reach to facilitating things like adaptation of 12 Volt “cigarette lighter plug” type cell phone chargers, and COAX heated clothing (example: heated gloves) connectors.  In addition, there are butt ended assemblies allowing do-it-yourselfers to install their own accessory circuits for charging such hand held electronics as GPS units and iPods.

So, it can be visualized that the SAE 2 Pin connector on your Deltran Battery Tender “Fused Quick Connect” pigtail provides access to your motorcycle’s battery and charging system 12 volt power.  This, in addition to providing the means to conveniently and effectively maintain and thereby extend the life of your bike’s battery.

The SAE 2 Pin connector is often alternatively called an SAE 2 Prong, SAE 2 Pole, SAE 2 Conductor connector, as well as a “flat” or “trailer” connector.  Generally speaking, it is intended for 12 Volt DC applications.  Assemblies with this connector can often be found in your local automotive store – usually in the form of a 12″ extension.  Widely imported, the quality and durability fits lighter applications.

Although some of the displayed assemblies are imported from abroad, those made for Bohemian Biker LLC (and to our specifications) are manufactured here in the USA !!! The higher quality of these SAE 2 Pin connectors manufactured here in the United States is obvious – they are sturdier, and have greater strain relief.

Additional Blog Posts pertinent to the above products can be found via headings at the top of webpage.  Note – It is very important for anyone attempting to use these assemblies to have a clear understanding of electrical concepts such as “polarity”.  We highly recommend educating oneself along this line.

Products are available via our ecommerce store at:

Solar Capitalist LLC is our sister company specializing in the Deltran line of Battery Tenders and accessories(including solar powered units), Global SUNLINQ Portable Solar Chargers and accessories, as well as, SAE 2 Pin connectors, leads, and cable assemblies (including heavier cable assemblies for handling higher amperages).

Bohemian Biker LLC and Solar Capitalist LLC are authorized dealers for both the Global Solar and Deltran lines of products.

Capitalize on the Sun’s Energy !


Leave a Comment :, , , , , , , , , , , , , , , , , , , , , , , , , , more...

SAE 2 Pin Surface Mount 12V Power Connection w/cap & leads

by on Aug.02, 2009, under SAE 2 Pin

SAE 2 Pin Surface Mount

SAE 2 Pin Surface Mount

So, here’s a product I stumpled upon that seemed like it might be useful to do-it-yourselfers like us!  We’ve been obtaining quantities for a couple years now, and they have become very popular.  Hoping to see some comments as to how they are being used, as well as pictures.  Seemed like tank bags might be a possible application, and some have mentioned this as being the plan.  This molded surface mount connector w/flange (1-7/8″ diameter) has four 3/16″ holes for mounting (fasteners not included), and (2) 12 AWG leads – approximately 11″ long.  As supplied, the red lead is mapped to “male” pin / black lead mapped to “female” socket side of 2 Pin.  For use as a power port, the “protected female” socket should be the “hot” (+) positive side – therefore, insulation colors would not be consistant with standard practice, i.e., red being “hot” positive.

We welcome email at:

This product is available through our new e-commerce website at:  

Here’s the link leading directly to the product discussed above:

Solar Capitalist LLC is our sister company handling products such as those discussed above, Deltran Battery Tenders, as well as Portable Solar Chargers – Capitalize on the Sun’s Energy !


Leave a Comment :, , , , , , , , , , , , , , , , more...

iPod Charging Adaptor

by on Apr.03, 2009, under Accessories

iPod Adaptor
iPod Adaptor


 We recently began carrying these iPod charging adaptors because they have an SAE 2-pin connector.  Prior to listing them, I consulted with supplier regarding their application.  Specifically, I was concerned about hitting an iPod with 12-volts DC, knowing that 12V charging adaptors often step the voltage down to that which the device is designed to receive.  The response I was given was that the iPod device has the internal electronics to accept voltages ranging between 10 and 30 volts DC.  This margin of tolerance laid my concerns to rest.   

Knowing that these charging adaptors were being marketed to provide the ability to charge an iPod using portable solar chargers, I felt fairly confident that this was the case.  At the same time, knowing customers may attempt to use the cable to charge their iPod using their motorcycle’s battery/charging system, I felt compelled to explore the topic further.   

As always, the necessity for proper fusing surfaces, and it is again incumbent upon the user to protect their device with  adequate fuse protection.   Whether that means changing out the fuse in their battery tender pigtail to a fuse of a lower value, or installing an inline fuse holder and fuse.   

Considering the iPod charging adaptor cable is only 4″ long, I would recommend purchasing our 5-piece accessory cable kit, or at least one of the component 8′ extensions.  Another avenue would be to obtain the components necessary to wire your own accessory circuit.  That circuit tailing off with an SAE 2-pin (i.e., one with a protected/female positive, which we refer to as a “power” side connector) to match up to the iPod charging adaptor cable (this has the exposed male positive pin, which we refer to as the “load” side connector) .   

So, this will be yet another hand held / portable electronic device we have found a way to charge by alternate means, i.e., via a portable solar charger, or using a motorcycle’s (ATV, etc.) battery / charging system.   

5/12/11 – Sorry to say…  the above iPod adaptor only works with early generation iPods…  It will not work with more current models…  We will be watching for developments in this area…  

We welcome email at:

Currently, our products are available through our new e-commerce website at:    

Solar Capitalist LLC is our sister company handling the above products, as well as Portable Solar Chargers – Capitalize on the Sun’s Energy ! 


Leave a Comment :, more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!