Bohemian Biker Blog

Tag: SAE 2 Pin

Desulfation of Lead-Acid Batteries

by on Jul.22, 2017, under Battery Tenders

Sulfation, which occurs in all lead-acid batteries, is the formation of sulfate crystals on the plates of a battery.

The rate at which these sulfate crystals form can increase with certain combinations of dis-use (for example – excessive draw down…or leaving battery in a low-charge condition), temperature, and charging technique.

A battery will both sulfate…and…desulfate…more quickly at warmer temperatures.

Sulfation is at least curbed by a process called “desulfation”…partially restoring the battery’s ability to hold a charge.

Desulfation  is a “pulse conditioning” charge technique, involving the application of high current pulses.  This technique is employed in an effort to break down sulfate crystals which have formed on a battery’s plates.

Automated means such as “microcontrollers” are often used to regulate pulses of varying widths and frequencies…since it takes significant time to desulfate a battery.

Much more can be learned on the Deltran Battery Tender website at: www.batterytender.com

Contact Ray Bowers via call or text at: 302-562-1706 or email at: bohemianbiker@bohemianbiker.com

Lots of discussion of SAE 2 Pin Connectors (widely used in the battery maintenance product industry) at:  www.sae2pin.com

Our Products can be seen on our ecommerce website at:  www.solarcapitalist.com

 

Leave a Comment :, , , , , more...

Access Motorcycle 12 Volt Power to Charge Cell Phone

by on Jul.22, 2017, under Accessories

Our 1st product, the Bohemian Biker 12V Power Port x SAE 2 Pin Connector assembly, has become widely popular among Bikers!

Cheap insurance, don’t You think?

When doing business out of a vendor booth at a Biker Event, where customers often ask questions about these – the look on their faces when I tell them $5.00 is one of “Five bucks… that’s all… are you kidding me…???”

I admit, offering them at that price they are intended to be a bit of a “loss leader” – with the hope customers will look further into our line of products. But, our intention is to keep prices very reasonable – period. No one wants to pay a high price for something, even if they’ve had a hard time finding it. That’s also why we use economical USPS 1st Class mail whenever possible. After all, who wants to pay as much for shipping as they do for the product?

Once you have one, you might just find a home for it in your saddlebag. Chances are, someday down the road it’ll come in handy in dealing with an inopportune dead cell phone battery. Just think of your “Hero” status upon being the one to pull this gizmo out when the need occurs.

Who doesn’t know the helpless feeling that comes when standing there with a dead cell phone – when you need to use it…???

Once in a while, I get questioned about the possibility of draining of one’s battery. Trust me, I’ve left a cell phone charging off my bike’s battery while I was away from the bike for several hours – no problem… Now, I can think of conditions under which one might not get away with this – a la, battery in poor state of charge, charging system not working properly, etc…

I’ll also admit, I’ve started my bike and rode for hours with my cell phone charging off the bike in my saddlebag. There are probably schools of thought that say “don’t do that”, but I do… This may be counter to cell phone manufacturer’s recommendations, but I do it in cars and trucks – no problem. The other consideration might be stealing away from your bike’s charging capacity. If your particular bike’s charging capacity is marginal with respect to loads – you may experience a problem.

In support of my beliefs and experiences above, with pushing several thousand of these assemblies out there being used – no one has come back to me with a story of a problem. Considering this a Blog providing the ability for customers to comment – we see no comments reporting any issues.

Also consider the fact that Deltran, the industry leader in battery maintenance with their line of Battery Tender models, offer a 12V Power Port x SAE 2 Pin connector. In fact, I know of H-D dealers offering these products. Obviously, if their use was an issue – they would be throwing up the flag.

Also consider that some bikers are piling on heated clothing loads, as well. Yet another battery connected quick connect pigtail accessing a bike’s 12 volt battery and charging system power.

So, the concept of tapping into a motorcycle electrical system is nothing new. Although it does need be to be done with forethought and care. Polarity, and fuse protection being two key issues.

As we’ve discussed in previous posts, the Deltran Quick Connect assembly has an integral fuse holder and a 7.5 amp fuse. Therefore, loads need to be limited to less than a total draw of 7.5 amps. Although you won’t approach that maximum with a cell phone charger, you may if you attempt to run a portable tire pump – I’ve seen where some 12V tire pumps draw 8 amps.

With respect to polarity, we have discussed that topic in previous posts, as well. Our Power Port Assembly is of the necessary polarity to work correctly when coupled to a properly installed Deltran Fused Quick Connect pigtail.

To view our products, please see our ecommerce website at: www.solarcapitalist.com

Please also see our Blog at: www.sae2pin.com

We’d be thrilled to discuss the specifics of Your particular application and answer any questions!

Contact Ray Bowers via cell with call or text at 302-562-1706, or email at: bohemianbiker@bohemianbiker.com

 

Leave a Comment :, , , , , , , , , , , , , , more...

SAE 2 Pin Connector Assemblies with Extended Leads

by on Mar.13, 2015, under SAE 2 Pin

SAE 2 Pin Surface Mount extended w/ 5 foot 12 AWG

SAE 2 Pin Surface Mount extended w/ 5 foot 12 AWG

As a result of offering some of our pigtail assemblies with “extended” leads, we have confirmed that there is adequate demand.  Therefore, we are moving forward with producing some of our assemblies with extended leads.

For example, offering our SAE 2 Pin Surface Mount pigtail assembly (12″ long cord with 12 AWG leads) “extended” out to 5′ with 48″ of separate 12 AWG leads – precipitated flow of orders prompting manufacture vs. “extension” through soldered joints insulated with heat shrinkable tubing.

http://www.solarcapitalist.com/sae2pin-surface-mount-assembly-extended.aspx

Similarly, we are offering the Shrouded SAE 2 Pin 12″ pigtail with 12 AWG “extended” out to 5′.  Thus far, we have seen little interest – but the “shrouded SAE 2 Pin” pigtail has not yet precipitated all that much interest.  Surprisingly, its benefits in terms of “connection protection” don’t yet seem to have been recognized.

This scenario has us looking at other opportunities.  For example, “extending” our SAE 2 Pin 12″ pigtail assemblies with red & black insulated 12 AWG  out to 5′.  It should be noted here that we already offer SAE 2 Pin with 5′ of 12 AWG – both leads with Black insulation.

SAE 2 Pin assemblies with longer leads are no doubt more convenient for some applications.  For applications in which 5′ leads avoids extension by the user, for example.  Clearly, this makes for a cleaner installation in some cases.

Manufacturing to a specific length requires us to consider the market for that specific configuration, but we are equipped and ready to “extend” our assemblies using soldered/heat shrink tubing insulated connections.

To view our products, please see our ecommerce website at: www.solarcapitalist.com

Please also see our Blog at: www.sae2pin.com

We’d be thrilled to discuss the specifics of Your particular application and answer any questions!

Contact Ray Bowers via cell with call or text at 302-562-1706, or email at: bohemianbiker@bohemianbiker.com

 

Leave a Comment :, , more...

SAE 2 Pin Connector Commercial Application

by on Jan.23, 2015, under SAE 2 Pin

Solar Capitalist LLC www.solarcapitalist.com and Bohemian Biker LLC www.bohemianbiker.com are Patriotic American Citizen Owned & Operated Family Business ventures, established in 2008.  We continue to grow Our Product Line in response to Customer desires, and strive to create positive Customer experiences with Our business processes.  This SAE 2 Pin blog is one of the means by which We attempt to capture the attention of those seeking knowledge with respect to, or a Customer oriented source for Top Quality SAE 2 Pin Connectors.

Over the past 7 years, We have grown from a business addressing the needs of individual do-it-yourself Customers, to a business working hand-in-hand with other businesses – making SAE 2 Pin Connectors available in a range of wire gauge and assembly lengths has become Our forte.

We’ve leveraged the needs of businesses seeking large quantities of SAE 2 Pin assemblies, into an opportunity for individuals to obtain SAE 2 Pin assemblies to meet their needs.  Often, the order size of a commercial customer makes production feasible – and thereby precipitates the availability to those requiring even single assemblies.

Customer requirements have also driven Us to widen Our services to include custom assembly to meet application specific needs.  For example, making soldered/heat shrink protected connections.

We are ever vigilant for opportunities to expand Our Product Line, and provide Services that are desired & appreciated by Our Customers.  Often, a product is the culmination of a process involving interaction throughout the development & production processes.

Applications have been encountered that stretch the use of SAE 2 Pin Connectors beyond those of the past, and in some cases – features have been added to facilitate such application.

Engineering background developed during many years spent in a long list of field, residential, commercial and industrial environments have enabled Us to wade through the wide range of specifications that We have encountered.

We have ventured into fields & applications far beyond those We initially set out to address.  This 12 Volt DC Connector is often encountered as a Hopkins Trailer Connector P/N 47965 and sometimes called a 2 pole flat connector and used as a Quick Connect or Disconnect.  What started with motorcycle applications, battery tenders, and portable solar chargers, has transitioned to – what applications are yet to be found for the SAE 2 Pin Connector?

Even more important is an intention toward Customer Focus.  Specific Customer needs & desires are seen as an Opportunity.

Customer inquiries are Always Appreciated, and We remain Ready & Willing to address Yours!

To view our products, please see our ecommerce website at: www.solarcapitalist.com

Please also see our Blog at: www.sae2pin.com

We’d be thrilled to discuss the specifics of Your particular application and answer any questions!

Contact Ray Bowers via cell with call or text at 302-562-1706, or email at: bohemianbiker@bohemianbiker.com

 

Leave a Comment :, , , , , , , , , , more...

Added SAE 2 Pin – 14 AWG !!!

by on Mar.05, 2012, under SAE 2 Pin

We recently added SAE 2 Pin connector assemblies with 14 AWG leads to our product line !!!

At this point we have a stock of “Power Side” assemblies with 14 AWG pigtail leads, i.e., red insulated conductor leading to the protected “female” side of the SAE 2 Pole connector.

We will be expanding our inventory of this product line from there – 1st to follow will be “Load Side” assemblies.  Then we will move on to assemblies with two black insulated leads (both 12″ pigtails & 5′ whips), which allows the installer to use the assemblies as desired with respect to polarity (Reference: past posts specifically addressing SAE 2 Pin connector polarity).

This line of SAE 2 Pin connectors with 14 AWG leads and whips is part of our continuing efforts to meet an ever wider range of current carrying capabilities.  Although we focus on motorcycle related applications here, there are a vast number of other applications for which our customers wish to use SAE 2 Pin connectors.

Our line of SAE 2 Pin connector assemblies enable many a “do-it-yourself” installer to obtain the wire gauge with the current carrying capacity necessary for his or her specific application.

We appreciate hearing about our customers’ intended applications – especially when we learn of those we hadn’t heard before.  Actually, intended use has often driven our development of an addition to our product line.  We have worked hand-in-hand with several customers in pinpointing the features of an assembly that will ultimately meet the needs of others, as well.

This is our chosen niche – addressing the needs of customers with a desire to utilize the SAE 2 Pin connector in their project.  We have, and will continue to develop our product line on that basis.  Our aim is to do that in a manner that creates ease on the part of our customers – both in terms of making products easily obtained at a reasonable price, and by providing a forum through which technical information can be accessed.

As always, we encourage our readers to comment and ask any questions they may have – chances are, if you have a question, others do, as well.  Therefore, others will benefit from your inquiry, and there lies the beauty of a technical forum such as this.

To view our products, please see our ecommerce website at: www.solarcapitalist.com

Please also see our Blog at: www.sae2pin.com

We’d be thrilled to discuss the specifics of Your particular application and answer any questions!

Contact Ray Bowers via cell with call or text at 302-562-1706, or email at: bohemianbiker@bohemianbiker.com

 

Capitalize on the Sun’s Energy !

bb-banner-1028083

Leave a Comment :, , , , , , , more...

Our Sweet and Simple 12 Volt Power Port x SAE 2 Pin Connector – A Popular Motorcycle Accessory

by on Feb.26, 2012, under Accessories, Application, SAE 2 Pin

Our 12V Power Port Adapter Assembly allows a Biker to tap into his or her motorcycle battery and charging system’s 12 Volt power while on the go.  This handy adapter assembly is designed to specifically address the needs of the Biker with a motorcycle not outfitted with a faring/dash mounted power port.  It facilitates convenient connection to an installed Battery Tender Fused Quick Connect pigtail, and thereby it allows the Biker to charge handheld electronics, such as a cell phone.

 

Sweet, Simple & Secure – the beauty of this setup is the ability to stow all involved components in an adjacent saddlebag.  In fact,  the design length of our assembly was set on that basis.  We chose SPT-1 cord with 18 AWG leads to minimize thickness –  thereby allowing the ability to close a hard case saddlebag across it without excessively stressing the hinges.  Often using this setup myself, I find it works very well for me.  In the event of traveling rain, obviously this setup would negatively impact the seal and should be avoided.

Not long for reaching 2000 of these assemblies sold, with nothing but positive feedback, continued popularity and sales are certain for this conveniently useful piece of electrical gear.  Many a do-it-yourself type has cobbled together a similar assembly, and it was just a matter of us taking on the manufacture of an optimally designed assembly a little more than 3 years ago.

Cheap insurance at our bargain price of $4.95 + shipping (less than $2.00 for USPS 1st Class shipping here in the US).  One of these adapters could very well save the day in the event yo find yourself in need of a means of communication and your cell phone battery is D-E-A-D.

Here’s a suggestion – consider talking it up with with friends such that you could assemble an order and share the cost of shipping.  Six or eight could still ship via economical USPS 1st Class Mail, 10 or 12 could ship via USPS Priority Flat Rate small box for $5.35.

We were pleased to see our industry partner – Deltran, bring their model to the table.  Outfitted with a 5 foot cord and a tethered cap for the power port socket – this is a great alternative.  A bargain as well at our price of $8.95 + shipping, we carry this model for those desiring its particular features.  This model facilitates the hot set up for a tank bag, or rally bag.

Please comment or email any questions or concerns – we welcome email at: bohemianbiker@bohemianbiker.com

These and other products are available through our e-commerce website at:  www.solarcapitalist.com  

Here are the links directly to the above assemblies:

http://www.solarcapitalist.com/12volt-power-port-sae2pin-adapter-assembly.aspx

http://www.solarcapitalist.com/deltran-12volt-power-port-sae2pin-adapter.aspx

Solar Capitalist LLC is our sister company handling products such as the above, Deltran Battery Tenders & accessories, and Global SUNLINQ Portable Solar Chargers & accessories.

Capitalize on the Sun’s Energy !

bb-banner-1028083

Leave a Comment :, , , , , , , , , , , , , , , , , , , , more...

Heated Clothing COAX x SAE 2 Pin Adapter Assembly Stock

by on Feb.21, 2012, under COAX

Our Heated Clothing COAX x SAE 2 Pin Adapter Assembly has been popular over the past years, and we increased our stock stock in preparation for early Spring 2012 riders!

This handy adapter assembly allows those who would like to avoid installing a 2nd Quick Connect pigtail – in addition to their Deltran Battery Tender Fused Quick Connect pigtail.

In other words, if in lieu of installing the COAX Quick Connect assembly that accompanied your heated clothing, you’d rather tap into your bike’s battery and charging system power via your existing Battery Tender pigtail – we’ve got the adapter for you!

This Heated Clothing COAX x SAE 2 Pin Adapter Assembly couples to the SAE 2 Pin end of your Battery Tender pigtail, making it a quick and convenient alternative to the Heated Clothing Quick Connect assembly.

Understand, you will be limited by the 7.5 amp fuse integral to your Deltran Battery Tender Fused Quick Connect pigtail.  Therefore, you won’t be able to stack up multiple pieces of heated clothing.  You should be fine powering a pair of heated gloves, but it’s important to consult the literature accompanying your heated clothing for the specific amperage draw.

I’ve hooked up and powered my girlfriend Jann’s (Tourmaster) heated gloves in this manner many times with no problem whatsoever.  I generally couple-up the assembly before I mount up (taking a few loops around the rear highway bar adjacent to where my Battery Tender pigtail hangs), and hand the gloves to Jann after she climbs on board.

For additional information (including pictures), please scroll down to similarly titled post dated 4/5/09 (below) under COAX Category.

Please also comment or email any questions or concerns – we welcome email at: bohemianbiker@bohemianbiker.com

These and other products are available through our e-commerce website at:  www.solarcapitalist.com  

Here’s the link directly to the above assembly:

http://www.solarcapitalist.com/heated-clothing-coax-sae2pin-adapter.aspx

Solar Capitalist LLC is our sister company handling products such as the above, Deltran Battery Tenders & accessories, and Global SUNLINQ Portable Solar Chargers & accessories.

Capitalize on the Sun’s Energy !

bb-banner-1028083

Leave a Comment :, , , , , , , , , , , , , , , more...

New Blogsite – SAE 2 Pin

by on Feb.10, 2012, under Hello World!, SAE 2 Pin

We recently went live with our new Blogsite – SAE 2 Pin

You can visit this website at www.sae2pin.com

As the name indicates, our newest Blog is acutely focused on the SAE 2 Pin connector.

What differentiates this new blogsite from the Bohemian Biker Blog is that it exclusively addresses the SAE 2 Pin connector, without the Bikes & Biker association.  A review of our SAE 2 Pin blog’s Categories (shown across the top of its posts and pages) will provide quick insight into the differences.

We have long felt that a website of this focus would benefit those with an interest.  Whether that interest be brought on by a planned 12 volt wiring project, or use of SAE 2 Pin outfitted equipment.

Recognizing the importance of understanding inherant issues like polarity, there exists plenty of room for a forum addressing such topics.   Our new blogsite is that forum.  Open to both those wishing to share their knowledge, as well as questions and suggested topics from the less experienced.

We hope you’ll visit our newest website, and comment often !!!

Leave a Comment : more...

SAE 2 Pin Blems

by on Oct.09, 2011, under Hello World!, SAE 2 Pin

About those SAE 2 Pin connectors available at automotive stores (actually, I have purposely not shown a picture of the version most readily available)…

Since I’ve had occassion to handle significant numbers, I’ve come to realize there are a large percentage that could be classified as “blems”.  I use the term “blems” because the imperfections are cosmetic – usually small openings in the molded connector itself, to the point where the wire insulation can be seen…

Functionally, these “blems” serve their purpose, but as a business specializing in SAE 2 Pin assemblies – I would not sell them without calling them exactly what they are, i.e., “blems”.

My point – buyer be aware… when you buy these connectors off the shelf, you are likely to get a “blem” here and there…  Let’s not forget – this connector is sometimes described as 2 prong, 2 pole, 2 conductor, as well as, flat, trailer, or 12 volt DC.

My followup point – a certain number of blems can be expected when you’re dealing in a product mass produced offshore.  Conversely, when you buy our American made Bohemian Biker LLC – SAE 2 Pin Connectors, you can count on the absence of “blems”, as well as, a higher quality, better fitting, sturdier connector.

Products are available via our ecommerce store at: www.solarcapitalist.com

Solar Capitalist LLC is our sister company specializing in the Deltran line of Battery Tenders and accessories(including solar powered units), Global SUNLINQ Portable Solar Chargers and accessories, as well as, SAE 2 Pin connectors, leads, and cable assemblies.

Bohemian Biker LLC and Solar Capitalist LLC are authorized dealers for both the Global Solar and Deltran lines of products.

Capitalize on the Sun’s Energy !

bb-banner-1028087

Leave a Comment :, , , , , more...

Heavy SAE 2 Pin Cable Assemblies

by on Oct.08, 2011, under Application, SAE 2 Pin, Solar

This is a display we constructed showing our Heavy SAE 2 Pin Cable Assemblies designed for handling higher amperages:

These are SAE 2 Pin cables assembled with 12 AWG (left, and left top), and 10 AWG (remainder) with Black insulation – allowing their use regardless of application with respect to polarity (i.e., without conflicting with standard polarity/insulation color practices).

Manufactured here in the USA to our specifications, and using the same sturdy, high quality SAE 2 Pin connectors for which we’ve become known .

In response to the desires communicated by customers – we have been contracting the manufacture of a wider and wider variety of SAE 2 Pin connector assemblies with both 12 AWG and 10 AWG wire.  These assemblies have been developed to meet the needs of the do-it-yourselfer, be they portable solar power enthusiasts, or a Biker.  Certainly there are others – we’ve outfitted customers with projects ranging from equipping a tractor for connection to a 12 volt spray unit, to HAM radio operators wanting a heavy gauge power feed.

Being a Biker myself, I had a burning desire to have a heavier gauge “pigtail” hanging from my ’01 Road King’s battery to support “jumping” the battery without having to remove the seat.  Always the Boy Scout – I am dedicated to “Being Prepared”, and being an Engineer, as well – I am dedicated to coming up with the means.  SAE 2 Pin connectors with 10 AWG pigtails and cables was the answer to my plan (and that of other Bikers, as well) , and so I contracted to have them manufactured.

Now, it was not my intention to to have an integral fuse in this heavy gauge pigtail – which clearly violates protocol.  Thinking in terms of this as a primary component in a “jumper rig” – I didn’t want the added complication (knowing full well, I’d have to pay especially close attention to the absence of a fuse in this pigtail assembly).  I must warn that this is a personal choice and responsibilty one is taking – not only by installing a pigtail without an integral fuse, but by “jumping” a motorcycle, as well.  Understand – there is a chance you might fry something by doing so.  I’ve done some research to educate myself along these lines, and I suggest anyone else do the same.  You have been warned !!!

Additional Blog Posts pertinent to the above products can be found via headings at the top of webpage.  Note – It is very important for anyone attempting to use these assemblies to have a clear understanding of electrical concepts such as “polarity”.  We highly recommend educating oneself along this line.

Products are available via our ecommerce store at: www.solarcapitalist.com

May also like to check out our Blog at: www.sae2pin.com

Contact Ray Bowers via call or text at: 302-562-1706 or email at: bohemianbiker@bohemianbiker.com

Solar Capitalist LLC is our sister company specializing in the Deltran line of Battery Tenders and accessories(including solar powered units), Global SUNLINQ Portable Solar Chargers and accessories, as well as, SAE 2 Pin connectors, leads, and cable assemblies.

Bohemian Biker LLC and Solar Capitalist LLC are authorized dealers for both the Global Solar and Deltran lines of products.

Capitalize on the Sun’s Energy !

bb-banner-1028087

Leave a Comment :, , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!